Gasoline Products

Pulleys and V-Belts

Gauges

Pumps

Armstrong

View our Product Catalog here.

Armstrong Pumps has pioneered an uncompromising range of products for customers in residential, commercial and industrial markets. From the very beginning, the Armstrong name has been a benchmark for quality in design, engineering and manufacturing.
Learn more...

Barnes Canada serves the diverse needs of diverse markets for fluid handling equipment throughout Canada. All of the CP&S brands - Barnes Pumps, Barnes Pressure Systems, Burks Pumps, Crown Pumps, Prosser Pumps, and Weinman Pumps - are sold and serviced through Barnes Canada. Learn more...

Series 4360 and 4380 Close Coupled Vertical In-Line

Overview

VERTICAL IN-LINE SERIES 4360
Armstrong’s economical, lower-range vertical inline pump for HVAC, domestic water systems, and industrial applications requiring a compact pump. Positive sealing assured by proven inside-type mechanical seal. Radially split volute permits removal of the motor and pump rotating assembly without removing the pump volute from the line. Fewer maintenance and servicing problems due to bearing-free pump design. Available in bronze fitted, all bronze, or all iron construction, in a range of sizes.

VERTICAL IN-LINE SERIES 4380

Armstrong’s close-coupled vertical in-line pump features economical inside-type, single-spring mechanical seal, serviced by removing the rotating assembly while the pump casing remains in the line. Dynamically balanced impeller assures smooth, vibration-free operation. Radially split volute with equal suction and discharge flange sizes. Separate tapped openings for gauge, flush and drain connections. Available in bronze fitted, all bronze, all iron, and ductile iron construction.

Design Features

Design Features – 4360

Easy servicing. A radially split casing permits removal of the motor and pump rotating assembly, without removing the pump casing from the line.
Easy removal of complete pump from the line when necessary, due to companion flanges, supplied with the pump.
Inside type mechanical seal serviceable without breaking pipe connections.
Flush and vent connection removes entrained air and ensures liquid at seal face at all times.
Equal suction and discharge connections result in simplified piping design and installation.
Fewer maintenance and servicing problems due to bearing-free pump design.

Design Features – 4380

Industry standard face mounted motor.
Flush and vent connection removes entrained air and ensures liquid at seal face at all times.
Inside type mechanical seal serviceable without breaking pipe connections.
Heavy cylindrical bracket with 360° register on both flanges provides a rigid union of pump and motor.
Dynamically balanced impeller assures smooth vibration-free operation.
Radially split casing with equal suction and discharge flange sizes. Separate tapped openings for gauge, flush and drain connections.
Liberal inlet passageways and straightening vanes provide optimum suction performance and quiet operation.
Ribs cast integral with casing. Machined surface to accept floor support when specified.
Confined casing gasket to meet stringent industrial temperature and pressure applications.

Typical Specifications

PUMPS - CLOSE COUPLED VERTICAL IN-LINE

Provide Armstrong single stage, single suction Vertical In-Line type pumps, with rising head to shut off pump characteristics. Refer to the schedule for pump flows and heads and motor speed, efficiency, enclosure and power requirements. The pumps shall be Armstrong Series 4360 or Series 4380 motor mounted Vertical In-Line.

Series 4360:

Pump casing shall be cast iron, suitable for 175 psig working pressure at 140°F. The casing shall be hydrostatically tested to 150% maximum working pressure. The casing shall be radially split to allow removal of the rotating element without disturbing the pipe connections. The casing shall be provided with NPT threaded companion flanges, for the appropriate pump size, with gaskets and hardware.

Pump impeller shall be fully enclosed type. The impeller shall be keyed and secured to the pump shaft by stainless steel fittings.

The pump shaft shall be a stainless steel stub shaft for frame 56 motors. The steel motor shaft shall be enclosed by a bronze shaft sleeve, on other motor frame sizes.

Mechanical Seal shall be single spring inside type with Carbon and Ni-Resist faces, EPDM elastomer, stainless steel spring and hardware. (Carbon and Ceramic faces, with Buna elastomer and brass hardware, on frame 56 motor units) Provide factory installed seal vent line, piped from the seal area to the pump suction connection.

Series 4380:

Pump casing shall be cast iron, suitable for 175 psig working pressure at 140°F. (Ductile Iron for pressures to 250 psig) The casing shall be hydrostatically tested to 150% maximum working pressure. The casing shall be radially split to allow removal of the rotating element without disturbing the pipe connections. The casing suction and discharge connections shall be the same size and shall be provided with drilled and tapped seal vent and pressure gauge connections.

Pump impeller shall be bronze, fully enclosed type. Impeller shall be dynamically balanced. A bronze shaft sleeve, extending the full length of the mechanical seal area, shall be provided.

Mechanical Seal shall be single spring inside type with carbon against O-ring mounted Ni-Resist faces. EPDM elastomer with stainless steel spring and hardware shall be provided. Seal vent line shall be factory installed and shall be piped from the seal area to the pump suction connection.

Motor power requirements shown on the pump schedule are the minimum acceptable and have been sized for continuous operation without exceeding the full load nameplate rating over the entire pump curve, exclusive of service factor.

Series 4360 & 4380 – Close Coupled Vertical In-Line Pumps

PDF Brochures

Series 4360 & 4380 Product Information