Specifications are subject to change without notice
Drives
Specifications
Catalogue No.
PCM4
Input Voltage (AC/1ph)
115 or 230V
Output Voltage Max. (DC)
±10V
Output Current Max. (DC)
10mA
Weight (lbs.)
.75
Catalogue
Description
Number
Foot Operated Speed Pot
174650
166
DC ADJUSTABLE SPEED DRIVES
ACCESSORIES
A reliable, economical master speed control unit for operating multiple variable speed
drives from a single 5K master potentiometer or field selectable DC voltage range of
0-5 through 0-25 VDC OR 0-25 through 0-200 VDC input (grounded or ungrounded).
Drives may be controlled to maintain identical speeds or individually pre-set
proportional speeds with respect to the MSC speed setting.
A microprocessor based digital speed potentiometer that can directly replace a
conventional 3-wire analog speedpot or motorized speedpot for most AC and DC
DRIVES 4HE DESIRED SET SPEED IS ENTERED INTO THE LARGE INCH RED ,%$ DISPLAY
through the convenient front-panel interface...and display units are now programmable
for virtually any unit of measure.
The DP4 Series is ideal for new equipment as well as for retrofitting most AC or DC
drive systems where precise, repeatable speed setting and digital readout are desired.
The DP4 is also ideal in applications where high vibration and other environmental
factors can cause normal speed pot settings to drift.
8 CHANNEL MASTER SPEED CONTROL
DIGITAL SPEED POT
FOOT SWITCH/POTENTIOMETER
The VARIOR is a foot-operated potentiometer. It is built for
variable speed applications where the operator is working
in a hands-free mode. It is CSA approved and features a
10K pot.
PROCESS CONTROL MODULE - PCM 4
The PCM4 card is a compact and cost-effective
solution for process control applications.
Powered by 115 or 230 VAC, the PCM4
uses Burr Browne Technology to isolate and
condition incoming DC voltage signals from
process controllers, motors, transducers,
microprocessors or any signal. Typically, the
output of the PCM4 connects to the input of a
motor drive; hence, incompatible devices safely
couple to yield a higher level of automation. Integrating this isolation card allows drives
to follow any non-isolated external voltage or current analog process control signal.
Dip-switch selectable, the PCM4 can follow any input voltage signal, grounded or
ungrounded, from -250 to +250 VDC, and any input current signal from 1 to 50 mA.
In response to the input, the PCM4 outputs an isolated bipolar signal from -12 to +12
6$# M! ,INEARITY OF
YIELDS PRECISE RESULTS (IGH RESOLUTION MULTI TURN
pots lets users scale the output to within millivolts of the input or any desired proportion
within the range of the output. Users may elect to control devices in manual mode
using normal potentiometer operation rather than from an external signal input.
Catalogue No.
DP4
Catalogue No.
MSC38A
